Mitchell MCE and Ultramate users have the ability to add “Dynamic Systems Verification Road Test” on the estimate as a NON included operation. Users can find this database selection in the “Reference Sheet >> Calibrations>> [...]

In DEG Inquiry 18181 MOTOR had made updates to seat belt retractors and buckles to show an “M” (Mechanical) classification. CCC users should be aware that some SRS components with a SRS squib connector may [...]

In DEG Inquiry 18138, MOTOR provides a breakdown of “Add if Required” operation “Aim Headlamps”. “Includes use of all necessary tools and equipment in-order to aim headlamps within specifications. The estimated work time for "Headlamp [...]

Audatex users may find contradicting information regarding labor operations stated in DBRM Section 4-3 Replacement & Recycled Operations: Door Shell Replacement. Page 86 of Audatex DBRM states “Seam sealing (when required)” is an included operation. [...]

Mitchell Collision Estimating Guide (CEG) replacement procedures may include “loosen and pullback carpet and/or insulation as required” as part of the welded panel replacement operation. Recent DEG Inquiry 18042 states “pull back the carpet is [...]

CCC/MOTOR GTE (P Pages) Special Precautions > Sectioning  “Some sectioning operations are not subject to Overlap Operations listed in the Headnotes of varying component groups. Adjacent components factored into Overlap Operation considerations may not apply [...]

When R&I of headliner is performed, CCC/MOTOR the GTE states “Weatherstrip D&R” (Disconnect & Reconnect) is included. “Weatherstrip R&I” (Remove & Install) is NOT INCLUDED. CCC users should note the difference between the D&R vs [...]

Audatex users that have recently updated to the newer version on Qapter estimating will come across a new look and feel of the entire estimating system from Audatex. Some enhancements made from ADXE is the [...]

Some vehicles may come from the OEM with chip guard/ stone guard applied to the rocker areas under the painted areas. There may be instances where a repair may only need to refinish or blend [...]

DEG Inquiry 17915 Response from Audatex “Prime and Block operations are only included for exposed welds on exterior panels.” An Example would be replacing inner structure items or frame rail sections. Audatex users may find [...]