CCC DEG Inquiry 19625 • Measuring the MIL thickness of paint is not included in the estimated work time. • The cost of materials for any ultrasonic couplant gels would not be included. • The [...]
CCC users now have the ability to quickly add common ADAS calibration and programing related operations without performing “manual entry”. These following operations default to “subl” when selected unless the end user selects “repair” if [...]
CCC – DEG Inquiry 20714 “After review of the concern, "spectrophotometer reading" or using a color match camera to get a color code formulation would not be included in refinish labor times. If the business [...]
New users of Mitchell Cloud Estimating (MCE) can watch an introduction of the estimating system if you are not familiar with the changes from Ultramate or simply being a new user. Additional videos are [...]
DEG Inquiry 20436 response from MOTOR: The setting of the Pick Up Box Assembly on a stand and the use of multiple techs is included in the estimated work time for the R&I/R&R of Pick [...]
Clear coat application to the nearest breaking point may be a necessary operation during vehicle refinish. Additional labor for panel surface preparation and clear coat application is NOT INCLUDED in 2.5 when the threshold has [...]
Some graphics may have additional “Labor Notes” that are specific to all the components in the graphics vs an individual part footnote or CEG. In the example below, the note indicates “All Parts in this [...]
DEG Inquiry 20533 response from MOTORS “The estimated work time applied to the Hub & Bearing is for replacement of all new parts. The time to remove the Hub from the Bearing is not included [...]
DEG Inquiry 20445 response from CCC - "An on-the-spot evaluation must be performed and agreed upon by both estimators to apply an estimated work time for the additional prep that needs to be done for ceramic application [...]
https://cccis.zendesk.com/hc/en-us/articles/5997834936596-Bumper-Refinish-Prompt CCC has made recent updates regarding the language of the BUMPER PROMPT. A better understanding of the prompt and how to correctly select “YES” or “NO” can be found on the link provided. It [...]
