Mitchell users may commonly locate "Refinish roof rail" labor operation in Mitchell estimating product. If the repair requires to blend instead of full refinish, the estimator will need to change the operation to blend. Refinishing [...]
DEG Inquiry 13451 provides feedback from CCC/MOTOR on masking the door opening when refinishing the uni-side/ aperture as NOT INCLUDED. Both the labor and the materials to mask the door openings are NOT INCLUDED. [...]
CCC – P Pages for Outer Panel R&R Replacement Does not Include : Glass & Regulator Mitchell – P Pages for Door Repair Panel R&R Not included operations: Remove and install or replace: Glass, hardware, [...]
CCC – DEG Inquiry 20794 “After review of your concern, this is not a MOTOR supported operation, The estimated work time for clearing data would need to be an On-the -Spot evaluation mutually agreed upon [...]
CCC DEG Inquiry 19625 • Measuring the MIL thickness of paint is not included in the estimated work time. • The cost of materials for any ultrasonic couplant gels would not be included. • The [...]
CCC users now have the ability to quickly add common ADAS calibration and programing related operations without performing “manual entry”. These following operations default to “subl” when selected unless the end user selects “repair” if [...]
CCC – DEG Inquiry 20714 “After review of the concern, "spectrophotometer reading" or using a color match camera to get a color code formulation would not be included in refinish labor times. If the business [...]
New users of Mitchell Cloud Estimating (MCE) can watch an introduction of the estimating system if you are not familiar with the changes from Ultramate or simply being a new user. Additional videos are [...]
DEG Inquiry 20436 response from MOTOR: The setting of the Pick Up Box Assembly on a stand and the use of multiple techs is included in the estimated work time for the R&I/R&R of Pick [...]
Clear coat application to the nearest breaking point may be a necessary operation during vehicle refinish. Additional labor for panel surface preparation and clear coat application is NOT INCLUDED in 2.5 when the threshold has [...]
